A source close to 91furniture What appears to be a rough schematic of the iPhone 16 Pro has been leaked, showing the usual design with some slight changes. The report also contains the exact dimensions, indicating a larger screen. But first things first. Here are the leaked images.
iPhone 16 Pro Schematics
As you can see, the iPhone 16 Pro is pictured with the so-called capture button positioned just below the power button on the right side of the bezel. The button itself mimics the soft shutter buttons found on cameras. A light press will focus the camera, while a full press will take a photo. Sony phones had this a while ago.
iPhone 16 Pro Schematics
Furthermore, the leak brings new dimensions: 149.6 x 71.4 x 8.4mm, which means the 16 Pro will be slightly taller and also slightly wider. This confirms an earlier report that the iPhone 16 Pro will launch with a 6.3-inch screen, up from last year’s 6.1-inch panel. Additionally, the schematics show some thin bezels, so we might see a larger iPhone 16 Pro after all.
The decision to expand the smaller Pro this year may stem from design constraints. Rumors are circulating that the iPhone 16 Pro will adopt the three-prism telephoto lens from last year’s iPhone 15 Pro Max, and the hardware may not fit the existing iPhone 15 Pro.
Interestingly, this leak appears to directly contradict an image leaked in February showing a vertical stack of cameras.
In any case, we are far from the actual release of the iPhone 16 series in September, so we take every leak with a good dose of skepticism.
Start a new Thread