We put the Honor Magic V2 through our rigorous SBMARK Display test suite to measure its performance across four criteria. In the results of this test, we will analyze how it performed in a series of tests and in several common use cases.

Overview

Key Display Specifications:

  • 7.92 inch OLED
  • Resolution: 2156 x 2344 pixels, (~402 ppi density)
  • Aspect ratio: 9.78:9
  • Refresh rate: 120Hz

Pros

  • Anti-glare film that improves screen readability
  • Smooth display reaction in every case of use

Against

  • Lack of readability in sunlight
  • Color rendering appears unnatural in outdoor conditions.
  • Lack of uniformity of brightness and color

The Honor Magic V2 scored very high in the display tests thanks to big improvements over its predecessor Magic Vs in all attributes, especially color and video.

Open screen readability benefited from the anti-reflective film, which was effective across most wavelengths, especially when used outdoors. The Magic V2’s peak brightness under similar outdoor conditions, however, was measured at 950 nits in High Brightness mode, which is on par with most foldable devices, but much lower than the advertised 2500 nits. Gamma was also better on the Magic V2 because rendering under sunlight was a little more natural. The Honor Magic V2’s 120Hz refresh rate (compared to the Magic Vs’ 90Hz) didn’t produce any flickering on the screen.

After readability, color was the next strong point of the device. Color accuracy of still content was good overall when tested in the faithful “normal” color mode, except in outdoor conditions when content tended to appear slightly desaturated.

The device provided a very satisfying video viewing experience thanks to the screen brightness for HDR10 videos and the color fidelity of the display in a dark environment. In indoor conditions, however, video performance was correct despite a slight lack of brightness.

Additionally, the display’s touch interactions were generally precise and smooth.

Test summary

About SBMARK display tests: For scoring and analysis, a device is subjected to a series of objective and perceptual tests under controlled laboratory and real-life conditions. The SBMARK Display Score takes into account the overall user experience provided by the screen, considering hardware capability and software optimization. Only factory-installed video and photo apps are used during testing. More in-depth details on how SBMARK tests displays can be found in the article “A Closer Look at SBMARK Display Testing.”

The following section focuses on the key elements of our comprehensive testing and analysis performed in SBMARK laboratories. Comprehensive reports with detailed performance evaluations are available upon request. To order a copy, contact us.

How the display readability score is composed

Readability evaluates the user’s ease and comfort in viewing stationary content, such as photos or a web page, on the display under different lighting conditions. Our measurements performed in laboratories are complemented by perceptual tests and analyses.

Skin tone rendering in an indoor environment (1000 lux).

From left to right: Honor Magic V2, Honor Magic Vs, OnePlus Open, Samsung Galaxy Z Fold5

(Photo for illustrative purposes only)

Skin tone rendering in an outdoor environment (20,000 lux).

From left to right: Honor Magic V2, Honor Magic Vs, OnePlus Open, Samsung Galaxy Z Fold5

(Photo for illustrative purposes only)

SCI stands for Specular Component Included, which measures both diffuse reflection and specular reflection. The reflectance of a simple glass plate is around 4%, while it reaches around 6% for a plastic plate. Although the first surface of smartphones is glass, their total reflectance (uncoated) is usually around 5% due to multiple reflections created by the complex optical stack.
The average reflectance is calculated based on the spectral reflectance in the visible spectrum range (see graph below) and human spectral sensitivity.

Uniformity

This graph shows the luminance distribution across the entire display panel. Uniformity is measured with a 20% gray pattern, with bright green indicating ideal luminance. An evenly distributed bright green color across the screen indicates that the display brightness is uniform. Other colors indicate a loss of uniformity.

Displays flicker for 2 main reasons: refresh rate and pulse width modulation. Pulse width modulation is a modulation technique that generates pulses of variable width to represent the amplitude of an analog input signal. This measurement is important for comfort because low-frequency flickering can be perceived by some individuals and, in more extreme cases, can induce seizures. Some experiments show that discomfort can occur more frequently. A high PWM frequency (>1500 Hz) tends to disturb users less.

How the display color score is composed

Color evaluations are performed under different lighting conditions to see how well the device handles color with its surroundings. The devices are tested with sRGB and Display-P3 image models. Both faithful mode and default mode are used for our evaluation. Our measurements performed in laboratories are complemented by perceptual tests and analyses.

Circadian action factor is a metric that defines the impact of light on the human sleep cycle. It is the ratio between the light energy that contributes to sleep disturbances (centered around 450 nm, representing blue light) and the light energy that contributes to our perception (covering 400 nm to 700 nm and centered at 550 nm, which is green light). A high circadian action factor means that the ambient light contains strong blue light energy and is likely to affect the body’s sleep cycle, while a low circadian action factor means that the light has weak blue light energy and is less likely to affect sleep patterns.

How the Display Video score is composed

The video attribute evaluates the handling of Standard Dynamic Range (SDR) and High Dynamic Range (HDR10) video in indoor and low-light conditions. Our measurements performed in laboratories are complemented by perceptual tests and analyses.

Video rendering in a low light environment (0 lux).

Clockwise from top left: Honor Magic V2, Honor Magic Vs, OnePlus Open, Samsung Galaxy Z Fold5

(Photo for illustrative purposes only)

These indicators present the percentage of frame irregularity in a 30-second video. These irregularities are not necessarily perceived by users (unless they are all with the same timestamp) but are an indicator of performance.

How the Display Touch score is composed

We evaluate touch attributes in many types of content where touch is critical and requires different behaviors such as gaming (fast touch and response times), web (smooth page scrolling), and images (accurate and smooth navigation from image to image). other ).

Let's talk about "Honor Magic V2 Display test" with our community!
Start a new Thread

Philip Owell

Professional blogger, here to bring you new and interesting content every time you visit our blog.